INTAMSYS PEEK is a high performance thermoplastic, PolyEtherEtherKetone. It is semi- crystalline and offers high- strength and stiffness as well as high-heat resistance. Also, as it is chemically resistant to aggressive environments, it is suitable for sterilisation for medical and food contact applications.

INTAMSYS PEEK-CF is a high-performance thermoplastic, PolyEtherEtherKetone (PEEK), reinforced with Carbon-Fiber. It offers high stiffness and high-heat resistance.

INTAMSYS PEEK-GF is a high-performance thermoplastic, PolyEtherEtherKetone (PEEK), reinforced with Glass-Fiber. It offers high stiffness and high-heat resistance.

INTAMSYS PEKK is a high-performance thermoplastic, PolyEtherKetoneKetone (PEKK). It has highly stable chemical backbone. Its semi-crystalline structure in solid state offers an outstanding combination of mechanical and thermal strength together with chemical and fire resistance.

ULTEM™ 9085 is a flame-retardant high-performance thermoplastic, PolyEtherImide (PEI) blend product.

It is ideal for the transportation industry due to its high strength-to-weight ratio and its FST (Flame, Smoke and Toxicity) rating.

ULTEM™ 1010 is a high-performance thermoplastic, PolyEtherImide (PEI), which offers excellent strength, thermal stabilityand the ability to withstand steam autoclaving. ULTEM™1010 offers high-heat resistance, chemical resistance and tensilestrength and is ideal for aerospace, automotive applications and others.

INTAMSYS PPSU is an amorphous high-performance thermoplastic, PolyPhenylSUlfone, which offers good impact resistance and chemical resistance. PPSU can operate in temperatures up to 180ᵒC and has superior hydrolysis resistance compared to other amorphous thermoplastics. It has virtually unlimited steam sterilizability. It also resists common acids and bases over a broad temperature range.

INTAMSYS PPS is an advanced PolyPhenylene Sulfidebased filament designed specifically for FFF 3D printing. It is a semi -crystalline, high-temperature engineering thermoplastic. Due to its structure, PPS is very resistant to chemicals with a very good mechanical strength, even at high-temperatures. In addition to its low water absorption, it also has good dimensional stability and excellent electrical properties.

INTAMSYS PC is an advanced PolyCarbonate based filament designed specifically for FFF 3D printing. In addition to high printing quality, great mechanical strength and heat-resistance, INTAMSYS PC offers excellent impact strength and fracture toughness, making it the ideal choice for engineering applications.

INTAMSYS PC-PBT (PolyCarbonate/PolyButylece Terephthalate polymer blend) is a thermoplastic alloy, which is designed specifically for FFF 3D printing. It offers good heat resistance and toughness at low temperature (-20 ̊C/-30 ̊C), and also features good chemical resistance.

INTAMSYS PC-FR is PolyCarbonate based material,It could achieve V0 performance in the UL94 flame retardancy test and displays excellent toughness, strength and heat resistance. This filament opens new applications in the automotive, railway and aerospace industries.

INTAMSYS’ PA is a nanoclay reinforced Nylon 6/6,6 co-polymer based 3D printing filament with improved dimensional stability and mechanical properties.

INTAMSYS PA6-CF is a Carbon- Fiber reinforced Nylon 6 based 3D printing filament with improved dimensional stability and mechanical properties.

INTAMSYS PA12-CF is a Carbon-Fiber reinforced PA12 (Nylon 12) filament. Thanks to the low moisture sensitivity of PA12, this product features outstanding mechanical and thermal properties even after the moisture conditioning process.

INTAMSYS ABS is a Acrylonitrile-Butadiene-Styrene based filament designed specifically for FFF 3D printing. It offers superior printing quality, excellent mechanical strength and heat-resistance, with moderate printing temperatures and great warping resistance.

INTAMSYS ABS+ is specifically designed for water soluble support solution. It has great adhesion with water soluble SP3030.

ABS is regarded as a difficult material to print. However, ABS+, with a number of unique properties can not only improve the printing success rate, but also greatly improve the dimensional stability.

INTAMSYS ASA is an Acrylonitrile-Styrene-Acrylate co-polymer based filament designed specifically for FFF 3D printing. It is an alternative to ABS with an improved weather resistance. Its UV resistance and excellent mechanical properties make it the perfect choice for real life applications.

INTAMSYS PLA is a 3D printing material PolyLactic Acid, with excellent mechanical properties and printing quality. It has a higher impact resistance than regular PLA, and better overall mechanical properties than ABS.

INTAMSYS PA12 is widely used in all walks of life because of its excellent chemical resistance, low moisture absorption and wide processing window. Excellent dimensional stability, ease of printing, and excellent thermal and chemical resistance makes PA12 an excellent choice for tools, fixtures and fixtures.

INTAMSYS SP5000 is a support filament designed for use with high-temperature model materials, like PEEK, PEEK-CF, PEEK-GF, PEKK, ULTEM™9085, ULTEM™1010, PPSU, etc. The material maintains rigidity during printing and goes soften after immersed in ethyl acetate solvent which is easily removable.

INTAMSYS SP5040 is a breakaway support material designed for use with ULTEM™9085 materials. The material has good heat resistance and sticks well with ULTEM™9085 during printing, and is easy to manually remove after printing.

INTAMSYS SP5080 is a breakaway support material designed for use with ULTEM™1010 and PPSU materials. The material has good heat resistance and sticks well with model materials during printing, and is easy to manually remove after printing.

INTAMSYS SP3030 Support Filament is water dissolvable support 3D printing material, and offers great compatibility to INTAMSYS ABS fusion+. The solubility is increasing with higher water temperature.

INTAMSYS SP3040 is water dissolvable support 3D printing material. It offers great compatibility to a variety of materials like PLA, ABS, TPU, PA, PA6-CF, etc. The solubility is increasing with higher water temperature.

INTAMSYS SP3050 is a breakaway support material designed for use with PA12 and PA12-CF model materials. The material maintains rigidity during printing and is easy to remove at room temperature, which can reduce the time required for post processing.

INTAMSYS HIPS is 3D printing material, High Impact PolyStyrene, with excellent printing quality. It possesses the properties of good impact resistance and low water absorption. It can also be used as the breakaway support material for ABS, ASA and PC.

INTAMSYS PVA, PolyVinyl Alcohol-based 3D printing material, is a water dissolvable support for PLA, TPU and Nylon based filaments.